USE:
Valves that allow the speed of one actuator to be adjusted in one direction and allow free flow in the other. Since they are not compensated for pressure, fluid regulation will depend on the pressure and viscosity of the oil.
MOUNTING:
Connect V to the power supply and C to the actuator to be adjusted. The flow is regulated from C to V and free in the opposite direction. In case of use on actuators with block valve, the VRF must be mounted between the actuator and the block valve. The flow is regulated by rotating the outer sleeve: turning clockwise increases the flow and vice versa. Once the flow rate has been adjusted, return the lock ring to the position so as to maintain the set values even in the presence of vibrations.
USE: Valves that allow to adjust the speed of an actuator in both directions. Since they are not compensated for pressure, fluid regulation will depend on the pressure and viscosity of the oil. The...
Unidirectional Flow Regulation Valves at 90°
USE: Valves that allow the speed of one actuator to be adjusted in one direction and allow free flow in the other. The internal compensation system keeps the speed constant even when the load varie...
OPERATION: This valve enables to keep “P” flow constant to a certain setting, independently of the required pressure or the inlet flow of the valve. Exceeded flow is drained directly in T (tank)....