USE:
Valves that allow the speed of one actuator to be adjusted in one direction and allow free flow in the other. Since they are not compensated for pressure, fluid regulation will depend on the pressure and viscosity of the oil. They are characterized by a high regulation sensitivity.
MOUNTING:
Connect V to the power supply and C to the actuator to be adjusted. The flow is regulated from C to V and is free in the opposite direction. When used on actuators with blocking valves, the VRFU 90 ° must be mounted between the actuator and the block valve. The adjustment is made by rotating the plastic knob, after loosening the locking pin on the side. With this particular configuration it is possible to obtain a precise and sensitive adjustment.
USE: Valves that allow to adjust the speed of an actuator in both directions. Since they are not compensated for pressure, fluid regulation will depend on the pressure and viscosity of the oil. The...
Pilot check valves are used to block the actuator in both directions. Flow is free in one direction and blocked in the reverse direction until pilot pressure is applied. These valves are very safe, th...
Pilot check valves are used to block the cylinder in both directions. Flow is free in one direction and blocked in the reverse direction until pilot pressure is applied.
These valves are used to block the cylinder in one direction. The flow is free in one direction and blocked in the reverse direction until pilot pressure is applied.
controlled descent of the load that does not escape dragged by its own weight, as the valve does not allow any cavitation of the actuator limitation of the maximum pressure in the event of shocks d...
controlled descent of the load that does not escape dragged by its own weight, as the valve does not allow any cavitation of the actuator; limitation of the maximum pressure in the event of shocks...
One of Galtech’s specialties is designing and manufacturing hydraulic gear pumps. Pumps range is divided into 3 categories: Group1, Group 2 and Group 3. Displacements range from 0,9 to 120 cc/rev and...
One of Galtech’s specialties is designing and manufacturing hydraulic gear pumps. Pumps range is divided into 3 categories: Group1, Group 2 and Group 3. Displacements range from 0,9 to 120 cc/rev and...