Part number: PN 854750 (12V) Std. drum / PN 854760 (12V) Long drum
Rated line pull: 2,722 kg / 6,000 lb single line
Motor: 2,390 w / 3.2 hp 12V series wound
Gear ratio: 3-stage planetary 216:1
Clutch (freespooling): Rotating ring gear
Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
Winch construction: Aluminum die cast housings with steel drum
Drum size:
DV-6 Std. drum : 63.5 x 125.5 mm (2.5” x 4.9”)
DV-6 Long drum : 63.5 x 227 mm (2.5″ x 8.9″)
Control: Waterproof remote w/ 5 m (17′) cord
Rope type: Galvanized aircraft A7 x 19
Rope size:
DV-6 Std. drum : 7.1 mm x 24.4 m (9/32” x 80’)
DV-6 Long drum : 7.1 mm x 30.5 m (9/32″ x 100′)
Mounting bolt pattern:
DV-6 Std. drum : 152.4 mm x 114 mm (6” x 4.5”)
DV-6 Long drum : 254 mm x 114 mm (10″ x 4.5″)
Winch weight (including rope) :
DV-6 Std. drum : 22.8 kg / 50.3 lb
DV-6 Long drum : 25.2 kg / 55.6 lb
Gross weight :
DV-6 Std. drum : 28.4 kg / 62.6 lb
DV-6 Long drum : 32.8 kg / 72.3 lb
Box dimension, (L x D x H) :
DV-6 Std. drum : 505 x 210 x 340 mm (19.9″ x 8.3″ x 13.4″)
Valve mainly used to operate two cylinders in sequence: upon reaching a certain calibration value, the valve opens and feeds a second actuator. The check valve allows the free flow of the flow in the...
Valves formed by two coupled 3-way diverters: each of the two sections has the function of diverting the flow from a single supply to two outlets. The two sections are operated simultaneously using a...
USE: Valves used to divert the inlet flow to two outlet ports. MOUNTING: Connect P to the power supply and ports A and P to the branches of the hydraulic circuit to which the flow is to be di...
USE: Valves used to divert the inlet flow to two outlet ports. MOUNTING: Connect P to the power supply and ports A and P to the branches of the hydraulic circuit to which the flow is to be...
USE: Valves that allow the inlet fluid to be divided into two equal parts (50/50), while in the opposite direction they reunite it regardless of the pressure variation generated by the actuators an...
OPERATION: This valve enables to keep “P” flow constant to a certain setting, independently of the required pressure or the inlet flow of the valve. Exceeded flow is drained directly in T (tank)....
USE: Valves that allow the speed of one actuator to be adjusted in one direction and allow free flow in the other. Since they are not compensated for pressure, fluid regulation will depend on the p...
USE: Valves that allow the speed of one actuator to be adjusted in one direction and allow free flow in the other. The internal compensation system keeps the speed constant even when the load varie...